Fxdfi Fat Bob

Welcome to my site! We have the Fxdfi Fat Bob information that you are looking for.

FEATURED PRODUCTS:

A great place to shop for Fxdfi Fat Bob products is Amazon.

We did not find any matches for your request.

Check out these fine shops that offer Fxdfi Fat Bob products:

Fat Bob 3 Stretched Gas Tank $350.99 Biker's Choice Fat Bob 3" Stretched Gas Tank 3" stretch with screw-in bung 5 gallon capacity Heavy-duty steel construction 1-piece, made without welded seams on extension Fits 84-99 Softail and custom frame with flat side mounts

Fat Stripe Hat $22.99 Fly Racing Fat Stripe Hat **Closeouts are limited to stock on hand**

Youth Fat Stripe Hat $22.99 Fly Racing Youth Fat Stripe Hat **Closeouts are limited to stock on hand**

Fat Jack Dolly $135.99 K&L Fat Jack Dolly Dolly allows you to move bikes that are on a Fat Jack Center Jack easily Sturdy, smooth rolling casters give this dolly the stability you need Maximum weight capacity is 600 lb. Fat Jack Center Jack sold seperately

Fat Series Grab Rail $62.99 DG Fat Series Grab Rail Lighter than stock while providing better support Made from oversized 1-1/4'' aluminum tubing Fat Series will take more abuse than anything out there Includes a flag mount

Fat Strap Trailer Kits $80.99 Powertye Fat Strap Trailer Kits Everything needed to tie down one sled or other vehicle Two pair of Fat Strap 1-1/2" deluxe ratchet tie-downs with genuine sheepskin sleeve and vinyl coated secure hook ends 6,000lb test nylon webbing; 1,500lb rated assembly Double security stitching 6-1/2' long Includes heavy duty Cordura nylon storage bag with zipper top closure Made in the U.S.A.

Fat Jack Center Jack $270.99 K&L Fat Jack Center Jack Easy-to-use scissor is the answer for raising bikes and ATV's Lifts front or rear of bikes that are on a lift Wide deck with rubber non-skid pad increases lifting area for increased stability Measures 16" L x 10" W Maximum Height: 13" Minimum Height: 3-1/2"

1-1/4 Fat Riser Bars $152.99 Biker's Choice 1-1/4" Fat Riser Bars Bars are 1 1/4" thick, 31” wide, with a 8-1/2” center width. Risers are 3 1/2" centers and available in 6, 8, and 10 inch heights Pre-drilled, dimpled for internal wiring Works with all standard controls, grips and risers. Polished and chromed finished. Welds at risers are polished smooth Made in USA ?-13 thread

1-1/2 Fat Riser Bars $197.99 Biker's Choice 1-1/2" Fat Riser Bars Bars are 1 1/2" thick and 31.5? wide Risers are 3 1/2" centers and available in 7 and 9 inch heights Pre-drilled, dimpled for internal wiring Works with all standard controls, grips and risers. Polished and chromed finished. Welds at risers are polished smooth Made in USA ?-13 thread

1-1/2 Fat Strap Deluxe $36.99 Powertye 1-1/2" Fat Strap Deluxe 1-1/2" wide chromacoat ratchet Vinyl coated, S-style snap hook end Sewn in sheep skin Soft-Tye 6,000 lb. test nylon webbing 1,500 lb. rated assembly 6-1/2 feet long Double security stitching Availbable in black or orange Sold in pairs Made in the U.S.A.

2- into-2 Fat Duals System $863.99 Super Trapp 2-into-2 Fat Duals System Fat Duals are the James Bond of exhausts, with a battleship deck gun appearance that look great and sound even better. Fat Duals incorporate staggered 1.75” primary head pipes and big, bold, full length, 2.5” heat shields The 3.5” bright, chrome, cylindrical muffler bodies incorporate removable and interchangeable end caps for complete personalization Include grooved, chrome billet end caps Fat Duals weigh 10% less than stock and they include 02 ports and plugs Click Here for Additional Exhaust Information

1 1/2 Fat Strap with Soft Tye $25.99 Powertye 1 1/2" Fat Strap with Soft Tye Same features as the standard fat straps A full 1 ?? wide x 72? long Lifetime warranty

Photochromic Fat Boy Sunglasses $35.99 Bobster Photochromic Fat Boy Sunglasses The Fat Boy photochromic sunglasses feature transitional lens technology. This photochromic technology is caused by molecular reactions to UV light that allows the lenses to darken reducing the amount of light reaching the eyes. The lens transmission allows 87%of light through indoors & allows 47% of light through outdoors. Featuring anti-fog, polycarbonate lenses. Increased comfort & protection with closed-cell memory foam around the eyes. The microfiber storage sleeve can be used for lens cleaning. Features: Frame Convertible: No Frame Finish: High Gloss Frame Foam Type: Closed cell EVA Frame Material: Polycarbonate Frame Measurements: Temple to Temple 135 mm, Height 44 mm Frame RX Ready: Yes Frame Temples: Skull Lens Coatings: 100% UVA and UVB protection, Anti-Fog Lens Color: These Photochromic lenses start with a light smoke tint and change to a darker Smoked Grey in direct UV light. Lens Material: Polycarbonate Lenses Interchangeable: No Other Included Accessories: Microfiber Carry Pouch, doubles as cleaning cloth Rx Limitation: +/-2 sph +/-2 cyl Special Features: Photochromic, anti-fog lenses Standards Met: CE EN-1836:2005 Storage: Microfiber Carry Pouch Warranty: Limited Lifetime against Manufacturing Defects

Fat Series Alloy Nerf Bar $179.99 Fat Series Alloy Nerf Bar from DG Bigger than other nerf bars and offers more torsional rigidity than 1 ?? nerf bars 1 1/2? diameter aluminum alloy nerfs look substantially bigger than the standard 1 ? nerf bars Most use stock heel guards

1-1/4 Springer Dragster Fat Bars $89.99 Biker's Choice 1-1/4" Springer Dragster Fat Bars 1-1/4" thick handlebars for Springer front forks Smooth swaged design Pre-drilled, dimpled and knurled for internal wiring Works with all standard controls, grips and risers Polished and chromed finished Made in U.S.A. Measure: 30.5" wide, 0 rise, 5.75" pullback

1-1/4 Springer Ape Fat Bars $149.99 Biker's Choice 1-1/4" Springer Ape Fat Bars 1-1/4" thick Smooth swaged design Pre-drilled, dimpled and knurled for internal wiring Works with all standard controls, grips and risers Polished and chromed finished Made in U.S.A. Measure: 38.75" wide, 12.5" rise, 10" pullback

Fat Peg Racing Nerf Bars $314.99 Pro Armor Fat Peg Racing Nerf Bars Fat Peg Racing Nerf Bars with integrated heel guard will protect you from running over your foot. Take it one step further by having a replaceable foot peg cage that is wider than stock with gnarly teeth and a kick-up at the end for more bite in the hardest of turns. Now it is possible to have a nerf bar that could last a lifetime. Completely TIG welded for maximum strength Race style foot peg designed into nerf bar Made from heavy wall 1 1/4" aluminum tubing **Note: Polaris Outlaw 525 S models will not fit 525 IRS

Die-Cast Lower Dash Panel $52.95 Drag Specialties Die-Cast Lower Dash Panel Chrome lower dash panel replaces the stock tank panel Compatible with aftermarket Fat Bob tanks with a singlegauge dash

Custom Quick-Bob Rear Fender $99.95 Drag Specialties Custom Quick-Bob Rear Fender Wide Glide-style with a raw steel finish Accepts stock fender struts and hardware Optional chrome license/taillight bracket, sold separately

Fat Series Swingarm Skid Plate $134.99 DG Fat Series Swingarm Skid Plate Toughest skid plate made 1/4” thick aluminum Protects swingarm, rear sprocket, disc and chain from virtually anything you can ride over Additional drainage slots so mud and water does not accumulate and increase your unsprung weight Includes a urethane chain strip

1-1/4 Fat Ape Hanger Handlebars $179.95 Khrome Werks 1-1/4" Fat Ape Hanger Handlebars 1-?" diameter formed handlebars with 1"; center mounting section and 1" grip mounts 12" and 14" versions available Pre-drilled for internal wiring; knurled for non-slip clamping Work with standard controls and grips For 08- present models with the electronic throttle control sensor unit or 1997-2007 models without electronic throttle control Available in 12" or 14" heights and 35" width; 12" center width; 11" pullback

Fat Crossbar Pad $17.95 20 mm double-polished vinyl with sub-surface printed covers over high-density foam 10" wide

Fat Peg Racing Nerf Bar Replacement Net $26.99 Pro Armor Fat Peg Racing Nerf Bar Replacement Net When wear and tear take their toll, keep your bars working like new Replacement net for Nerf Bar

Round Sissy Bar for Hard-Tails $86.95 Drag Specialties Round Sissy Bar for Hard-Tails Chrome-plated 1/2" diameter cold rolled steel Fits rigid frames with axle plates approximately 10" apart Available in two styles; Flat fender or Fat Bob fender Flat fender style measures approximately 15" above fender Fat Bob style measures approximately 19" above fender

Fat-Slims Trigger Mount Kit $142.95 Fat-Slims Trigger Mount Kit from Memphis Shades Gone are the days of fumbling with tools to remove your Memphis Fats, Slims, and Sportshields Kits feature a detach system that allows you to quickly and easily remove your windshields without the use of any tools A pair of latches lock the windshield down until the spring loaded "trigger locks" are intentionally disengaged, allowing the rider to remove the windshield Kits are a combination of CNC-machined aluminum plates, stainless steel bolts and aluminum anchors Kits are custom-fit to each style of bike for a truly no-hassle installation **NOTE: The following models require Turn Signal Relocation Kit: Click Here to Select Your Application Honda VT700C Magna '87 VT750C Magna '94-04 Shadow 800 '88 VTX1800 '01 Kawasaki Vulcan 1500 '88-99 (Does not fit Fuel Injected Models) Vulcan 1500 L '96-99 (Does not fit Fuel Injected Models) Suzuki VL800K1 C50T '05-09 Yamaha Virago 750 '85-99 Virago 1100 '85-99 Virago 1100 Special '97-99 **NOTE: Does not fit these models with air forks: Yamaha Virago 750 '85-99 Virago 1100 '85-99 Virago 1100 Special '97-99 **NOTE: The following models must use windshield with 9" headlight cutout Honda VTX1300S/R '03-08 VTX1300C '04-0 Kawasaki Vulcan 900 Classic '06-08 Suzuki Intruder 800 Volusia '01-08 C50 '01-08 Yamaha Roadliner 1900 '06-08 **NOTE: Mounts are bike specific and may vary from image

Bob Retro-Style Air Cleaner $64.95 Drag Specialties "Bob" Retro-Style Air Cleaner Retro-style chrome-plated air cleaner measures 5 1/2 in diameter Has a re-useable foam filter element All necessary mounting hardware included Replacement filter element available separately Note: Support bracket not included; sold separately Click Here for Support Bracket

Longhorn ISO Brake Pedal Pads $32.99 Application All FXST Models, all '08-'10 Rocker Models, '93-'10 Dyna Wide Glides, '08-'10 Dyna Fat Bob with Forward Controls, and all K?ryakyn Forward Controls

Serrated Brake Pedal Cover $44.95 Joker Machine Serrated Brake Pedal Cover Ergonomically corrects the angle for better feel and operation. A must have when using forward control extensions Fits: All FXST Models, all '08-'09 Rocker Models, '93-'08 Dyna Wide Glides, '08-'09 Dyna Fat Bob with Forward Controls Fully CNC machine from billet aluminum Available in your choice of "HARD BLACK" anodized or raw aluminum finishes Measures 2-1/2" x 2" All mounting hardware included Made in the U.S.A.

005 Advance Fat Street Motorcycle Tires $261.95 Shinko Tire has heard the customer requests for a fat rear tire for the custom sportbike market and have responded with this exciting new offering for the U.S. Market: the 005 Advance in a 240/40 VR18 size. Just like its predecessor, the 240 size

Bob Micro Fiber Sponge $7.99 See the Features tab for information.

Other Products purchased from this website:
chrome clutch lever assembly harley dyna fxdf fxdfi fat bob 2008 thru 2012

Filed under: Harley Davidson

Like this post? Subscribe to my RSS feed and get loads more!